Forms for the manufacture of paving tiles from recycled materials copolymers

According to the manufacturers: Moulds perfectly working in the production of paving tiles, can withstand 500 fills, the product is well knocked out of forms, the concrete in the forms kept for 48 hours, forms for concrete products do not require washing and good copy drawing shapes on the product. Forms for the tiles have a clear path and ribs. Tile is obtained with clear geometric data.

In fact: If the forms are really from the copolymers, they are almost entirely correspond to the manufacturer, only about 10% of these forms are available from secondary copolymers (copolymers of this secondary recycled materials which is made from used batteries), 90% of the forms produced from recycled plastic and polypropylene polyethylene, such forms do not have the gloss absolutely bursting at the vibrating table after 10 knock-outs,

Taking the form of forms had to look glossy, well take two hands and roll in different directions, the form should not pop if the form of copolymers, it will stand, if recycled plastics other form of crack in the corners, so you can protect yourself from non-bona fide manufacturers. The same forms of Polish production has not burst and have a great life. If your form is really from the copolymer, although secondary housing, they are almost entirely correspond to the manufacturer.

Disadvantages forms: Forms of the recycled plastic can not be washed in hydrochloric acid, because the front part of the form is not visible for film and washing your 2 - 3 times with acid, the film will disappear and you will not even know about it, forms no longer work and will be sticky. After washing with acid you have to constantly clean and lubricate that takes a lot of time. In the warm season or a warm room products are knocked out in 48 hours, and cold season is better to keep poured concrete form 60 hours in connection with this you need to have three times as many forms as you plan to produce paving slabs. Encapsulated form of concrete to dry on racks in a bunch of not Folding because the tile is deformed and will have a lot of marriage, because marriage is obtained if the concrete in the forms was less than 48 hours, we get a lot of chipped corners.

Forms for the production of paving tiles from recycled polypropylene

According to the manufacturer: The forms have a resource 500 fills forms glossy, suitable for any technology and does not require washing in acid, easily knocked out, have the ribs. Concrete in the forms kept for 24 hours.

In fact: The forms have partial gloss concrete in the forms be kept for at least 36 hours, it is desirable to keep the 48 hours to achieve partial gloss paving slabs. Form suitable for conventional paving tiles. Forms are not washed and when exposed 48 hours is not sticky. Forms have ribs.

Disadvantages: Forms of recycled polypropylene, and most of the mixtures of recycled plastic and come in different colors, even though all the colors muddy ill-defined. While the form and have ribs they burst mostly in the corners from the start after 3 - 5 knockout. Buying these forms for your production do you risk being left without any form within 10 days.

Forms for the production of paving slabs from the primary PE are different bright colors

According to the producers: Forms of very high quality with a perfect gloss and with a lot of ribs. Forms are not washed, not sticky, drenched in the form of racks can be settled without the top of each other. Forms are perfect for any technology. The service life forms at least 1000 fills. Forms do not burst or crack. Sidewalk tiles of such forms easily knocked out in 24 hours. Forms have distinct geometry and articles of these forms also have a clear geometry.

Advantages: The forms have all the advantages of these manufacturers forms. With these forms out high-quality glossy production and the form really fit into any technology.

Disadvantages: lack of form has little except that it is not recommended to lay without shelves, though the shape and thick walls when installing on non-smooth surface has the ability to deform the product.

Forms for the production of glossy paving slabs from the primary polymer polypropylene with polymer additives

According to the manufacturers: Moulds are made from high quality polymer polypropylene primary English. Forms have a wall thickness of not less than 6 millimeters, a lot of ribs. Forms for the paving slabs and other concrete products are a perfect gloss, which is perfectly transferred to the produced products. Exposure of concrete products and in particular the paving slabs in normal conditions 24 hours in a warm place for 12 hours. Forms practically do not give marriage and chips. Forms for the manufacture of concrete products and paving tiles fit perfectly into any existing technology, the forms are not sticky, the forms do not require absolutely not a wash, Polymeric forms have the ability to regenerate itself. If the manufacturer of paving slabs I saw that on the forms you have any micro scratches, should be held encapsulated form of 36 - 48 hours and your form will be new again, as the scratches on the forms can not be, and this effect is apparent in the glossy.

Polymer polypropylene forms do not require shelves and relaying easily stacked on each other just as they have a lot of ribs and thickened bottom form up to 8 millimeters. The service life forms at least 1500 fills.

Advantages: All the manufacturers forms dignity fully comply with the stated. Forms really are ideal for any technology and products of these forms, even on conventional technologies are perfectly glossy. Shape does not really require relaying and shelving. The service life is much higher than claimed by the manufacturer. I have such forms of work for four years. Moulds for tiles are ideal for the production of high quality paving slabs and other concrete products.

Disadvantages: Lack of these forms alone. I have to manufacture many kinds of forms, and if workers are not forced to work with other forms, they will volunteer to work only with these polymeric forms, while others will be idle.

Polyurethane form for exclusive paving slabs of concrete

Polyurethane forms are mainly used for production of artificial ornamental stone for cladding facades and interiors.